250mm Knott Brake Adjuster – Trailer Brake Adjuster Kit 250x40mm
Our Part No. BKADJK25
Manufacturer’s Part No. 572008
This part is universal and will therefore fit the left hand and right hand brakes.
The bolt head fits on the outside of the backplate face.
It takes a 19mm spanner, which is used to adjust the brakes.
The threaded section of the adjuster comes through the backplate which is secured with the hexagon nut.
The 2x wedge parts then sit either side of the nut.
When the brakes are properly adjusted, the Handbrake on the Coupling will sit at a 90 degree angle.
Designed for 250x40mm trailer brakes only.
If you require other replacement parts for these trailers brakes, then please see the links below;
Knott 250x40mm Trailer Brakes
If you have the smaller 160mm, 200mm or 203mm Knott brake and require spares, then please follow the link below;
160x35mm Knott Trailer Brakes
200x50mm Knott Trailer Brakes
Knott 203x40mm Trailer Brakes
250mm Knott Brake Adjuster – Information
If you require any instructional or informative videos, then please see our Youtube channel;
Towing and Trailers Youtube Channel
If you require any guidance with building a trailer, then please follow the links below;
IVA Manual
Type Approval
Building a Trailer