Meredith Unbaked Trailer Hub 5.5 Inch PCD 11749 44649 Bearings
Our Part Number – H35
Designed for Meredith and Eyre unbraked Trailers.
This Hub has a 5.5″ PCD measurement.
Hub Depth – 89mm.
Meredith Unbaked Trailer Hub 5.5 Inch PCD 11749 44649 Bearings – Technical Information
Wheel Bearing Specifications – 11949 | ||
Internal Diameter | Overall Diameter | Width |
19.05mm | 45.24mm | 15.49mm |
Wheel Bearing Specifications – 44649 | ||
Internal Diameter | Overall Diameter | Width |
26.99mm | 50.29mm | 14.22mm |
Wheel Bearing Seal Specifications – 212137 | ||
Internal Diameter | Overall Diameter | Width |
1.37″ | 2.12″ | 0.31″ |
The wheel hub also uses 1/2″ UNF Wheel Nuts and Studs with 19mm head.
A 50mm Hub Cap us also included with this Hub (This is supplied metal or plastic, depending on stock).
The Outer Races of the Bearings come already pressed into the hub.
To view our full range of unbraked wheel hubs, please
Click Here
Fitting these bearings –
- Firstly, start by thoroughly greasing the inner bearing. Use your hand for best results.
- Next, slide the bearing onto the shaft making sure it is firmly pushed back. At this point be sure that the black seal is facing inwards.
- Then, grease the inside of the hub and the outer bearing.
- Re insert the outer bearing into the drum, tapered edge facing outwards
- Finally, slide the drum onto the shaft.
If you need wheel bearing grease, follow the link below;
Trailer Wheel Bearing Grease
For more information on replacing / fitting trailer wheel bearings, please follow the link below;
Trailer Wheel Bearing Replacement Guide
however, if you are unsure or require technical guidance, please call our team on 01909 473749.
If you require any guidance with building a trailer, then please follow the links below;
IVA Manual
Type Approval
Building a Trailer