Basket
Knott Avonride P Series Trailer Hub 100mm PCD – Sealed Bearing
Our Part Number – HUBARP100
Manufacturer’s Part Number – C24010.002
This is a P Series unbraked trailer hub.
The shaft size required to fit this hub is 34mm diameter x 37mm long.
The hub comes complete with the following;
- 309726 Bearing fitted in the Hub
- Circlip fitted in the Hub
- M24 One Shot Nut with 32mm Head
- 64mm Hub Cap
- M12 x 1.5 x 24mm Conical Wheel Stud Bolts
- Knott Rear Seal for 309726 SFL Bearing
This Hub has a 100mm PCD measurement.
Hub Depth – 60mm.
Will fit wheels with a 100mm PCD with either a 57mm or 60.5mm diameter centre hole.
Knott Avonride P Series Trailer Hub 100mm PCD – Sealed Bearing – Technical Information
| Wheel Bearing Specifications – 309726 | ||
| Internal Diameter | Overall Diameter | Width |
| 34mm | 64mm | 37mm |
Maintaining a P Series Wheel Hub
The hub comes with a Sealed For Life Bearing pressed into the hub, which means very little maintenance is required.
It is good practice to check the torque settings on the wheel bolts frequently.
To check for play in the bearings, simply give the wheel a ‘shake’ to check for movement in the bearing and hub.
If there is any play, we recommend you change the bearing immediately.
The hub nut is a High Torque One Use nut and should be replaced with a new one if loosened.
If you require any spares for this hub, please see the links below;
1. Replacement 64mm Hub Cap
2. M12 Conical Wheel Stud Bolts
3. Replacement One Shot Hub Nut
4. Replacement SFL Bearing
5. Replacement Rear Seal
To view our full range of unbraked wheel hubs, please
Click Here
For more information on replacing / fitting trailer wheel bearings, please follow the link below;
Trailer Wheel Bearing Replacement Guide
however, if you are unsure or require technical guidance, please call our team on 01909 473749.
If you require any guidance with building a trailer, then please follow the links below;
IVA Manual
Type Approval
Building a Trailer
