Trailer wheel bearings
Economy Sealed Bearing
A range of economy sealed bearings for Al-Ko and Knott Avonride brake drums used on trailers like Ifor Williams. All bearings are slightly different sized ad have their own unique number, which is engraved on the bearing.
Premium Sealed Bearings
Our premium bearings are to suit Al-Ko and Knott Avonride brake drums, which are used on various trailers including Ifor Williams. All bearings are different sized ad have their own unique number, which is engraved on the bearing.
Economy Taper Roller Bearings
Economy Taper Roller bearings to suit the unbraked standard 1 inch trailer hubs. Provided with seals (where necessary) and outer race. Some of these bearings will also fit the Knott Avonride A series and R series drums.
Premium Taper Roller Bearings
Our premium Taper Roller bearings are produced by manufacturers including; NTN, Timken and more.
A selection of bearing seals available to suit the range of bearings we keep and more. Please be sure of bearing and current seal measurements before purchasing.
We keep a variety of bearing kits to suit Knott Avonride, Al-Ko, Indespensio, Ifor Williams, Bradley, Meredith and Eyre, Peak, Erde and Daxara. There are different sizes of taper roller and sealed bearings available.
Trailer wheel Bearings
Trailer wheel bearings come in many variations and sizes of either sealed or taper roller bearings. The variations of trailer wheel bearings are vast due todifferent weights and manufacturers of axles. We can offer a choice of economy andpremium bearings. Our premium bearings come frommanufacturers such asTimken, NTN, Koyo and more. Yourbearings can be identified by a unique number which can befound marked on the bearing. However, if the number has worn off your bearings over time, you canidentify your bearing with accurate measurements. Internal diameter, overall diameter and width
Sealed bearings come ready to fit and do not require greasing. Usually a large 1 piece bearing that is tightly fitted in to the hub, secured by a circlip. We recommend using a press when removing and fitting sealed bearings. European Axles were the first to introduce sealed bearingsbut they are are becoming more popular in the UK.Sealed bearings are also known as Sealed For Life (SFL), meaning that the unit is sealed and can not be maintained. The most common use for a sealed bearing is on the following drums and trailers;
- Al-ko drums
- Knott SFL (P, X, Y series) hubs and drums
- Ifor Williams manufactured after 1992
- Some peak, Indespension and Meridith and eyre
- Erde and daxara (some)
Most Sealed bearings need to be torqued correctly to offer maximum bearing life.
Taper Roller Bearings
Trailers still commonly use taper roller bearings. It is easyto maintain and inspect taper roller bearings. Although it is possible to change taper roller bearings without a press it is easier with a press. When tightening taper roller bearings werecommended to torque to 70Nm. Rotate the wheel at least 1 full revolution then loosen off and tighten finger tight. Over tightening will destroy the bearings. Ourextensive range of taper roller bearings willsuit a variety of hubs and brake drums.
- Knott Hubs and drums (A, C,E, N, R & V series),
- Al-ko Drums,
- Bradley Drums (All),
- Indespension (most)
- Meredith & Eyre
- Peak trailers (most)
- Erde and daxara (some)
- Ifor Williams Pre 1992
- and many more
We can supply complete bearing kits with and inner and outer bearing and also rear seal if required. These kits are suitable for most current manufacturers of trailer axles.