M10 Nyloc Nut BZP P-Type
See our M10 Nyloc BZP P-Type
Our part number – BTNN10P
M10 Nyloc BZP Nut P type is a deeper nut than the “T” type and because of this it has more threads and is a stronger fitting than the “T” type.
This nut will fit any m10 bolt with a pitch of 1.5mm. The use of the nylon in the nyloc nut is to prevent the nut from loosening due to vibration.
We recommend that a nyloc nut is only used once as the nylon within the nut is cut to suit the bolt as tightened which provides the added anti vibration properties. When the nut is then removed the nyloc is damaged and thus will not give the same protection on the seconds use.
Details shown below.
Dimensions
t Diameter of thread 10mm
H Overall Nut thickness 11.5mm
h Side Height 8.04mm
S Head size across flats (spanner size) 17mm
n Nylon locking material
Other Information
Thread Pitch 1.5mm
Finish BZP
Tensile Grade 8.8
Uses on towing and trailer equipment.
Typically used for general fixings
Other related products
Please Note – If you have any questions or if you would like any further information regarding this product. Then please feel free to call us on 01909 473749. We are more then happy to help and look forward to your call.
If you need technical help or assistance with photos you would like to send please email info@towingandtrailers.com
Also if you would like to view our Youtube we have lots of information that you might find useful. Then please follow the link below;
Youtube.