Basket
Trailer Running Gear RKB260D14-S1 Knott KFG27 Coupling 14 Inch Wheels
This kit gives you the running gear you need to legally run a braked twin axle trailer with a gross weight of 2600kg.
Our Part Number – RKB260D14-S1
Suitable for a twin axle trailer, which also uses 14″ wheels.
Tyre size is 185/85R14C with 5 stud 112mm PCD.
The mounting plates supplied have 8 holes which therefore suit the suspension units in the kit.
Also supplied with a Cast Steel Coupling; KFG27 2700kg to suit an A Frame drawbar.
The hubs supplied are A Series.
As well as the hubs being supplied with Taper Roller Bearings, they are also supplied with hub caps, nuts and studs.
A Castle Nut Nut is also supplied within the hub.
200x50mm brake size.
Please Note – This kit does not include mudguards.
If you wish to purchase a kit with Mudguards and / or Waterproof Bearings, then please also use the link below to chose an alternative kit;
2600kg Trailer Running Gear Kits
Included In Trailer Running Gear RKB260D14-S1 Knott KFG27 Coupling 14 Inch Wheels;
Description |
Part Number |
|
| 2x Pairs Knott Avonride 1300kg Braked Suspension Units | SU130B-112-A | |
| 4x Wheels with 112mm PCD | WT18580R14C(5×112) | |
| 4x 8 Hole Suspension Mounting Plates | SP07 | |
| Breakaway Cable | Included with Coupling | |
| Knott Avonride KFG27 2700kg Braked Coupling Cast Head | CCB2700KC | |
| 7 Hole Brake Cable Anchor Plate | BCAP07P | |
| Brake Cable Compensator | BACOMKTP | |
| 2x 1330mm Brake Cables | BKC113K | |
| 2x 1430mm Brake Cables | BKC143K | |
| Nuts, Bolts and Fixings | ||
| 32x M12 x 30mm Set Screws | BT12080SS | |
| 4x M12 x 120mm Set Screws | BT12120SS | |
| 72x M12 Washers | BTW12 | |
| As well as 36x M12 Nyloc Nuts | BTNN12 | |
If you require any guidance with building a trailer, then please follow the links below;
IVA Manual
Type Approval
Building a TrailerTrailer Running Gear RKB260D14-S1 Knott KFG27 Coupling 14 Inch Wheels
This kit gives you the running gear you need to legally run a braked twin axle trailer with a gross weight of 2600kg.
Our Part Number – RKB260D14-S1
Suitable for a twin axle trailer, which also uses 14″ wheels.
Tyre size is 185/85R14C with 5 stud 112mm PCD.
The mounting plates supplied have 8 holes which therefore suit the suspension units in the kit.
Also supplied with a Cast Steel Coupling; KFG27 2700kg to suit an A Frame drawbar.
The hubs supplied are A Series.
As well as the hubs being supplied with Taper Roller Bearings, they are also supplied with hub caps, nuts and studs.
A Castle Nut Nut is also supplied within the hub.
200x50mm brake size.
Please Note – This kit does not include mudguards.
If you wish to purchase a kit with Mudguards and / or Waterproof Bearings, then please also use the link below to chose an alternative kit;
2600kg Trailer Running Gear Kits
Included In Trailer Running Gear RKB260D14-S1 Knott KFG27 Coupling 14 Inch Wheels;
Description |
Part Number |
|
| 2x Pairs Knott Avonride 1300kg Braked Suspension Units | SU130B-112-A | |
| 4x Wheels with 112mm PCD | WT18580R14C(5×112) | |
| 4x 8 Hole Suspension Mounting Plates | SP07 | |
| Breakaway Cable | Included with Coupling | |
| Knott Avonride KFG27 2700kg Braked Coupling Cast Head | CCB2700KC | |
| 7 Hole Brake Cable Anchor Plate | BCAP07P | |
| Brake Cable Compensator | BACOMKTP | |
| 2x 1330mm Brake Cables | BKC113K | |
| 2x 1430mm Brake Cables | BKC143K | |
| Nuts, Bolts and Fixings | ||
| 32x M12 x 30mm Set Screws | BT12080SS | |
| 4x M12 x 120mm Set Screws | BT12120SS | |
| 72x M12 Washers | BTW12 | |
| As well as 36x M12 Nyloc Nuts | BTNN12 | |
If you require any guidance with building a trailer, then please follow the links below;
IVA Manual
Type Approval
Building a Trailer
