Basket
150kg Unbraked Trailer Running Gear Cast Head 10 Inch Wheels
This kit gives you the running gear you need to legally run a trailer with a gross weight of 150kg
Our Part Number – RKU015S10-H1
Suitable for a single axle trailer, which also uses 10″ wheels.
Tyre size is 500/10 4 Ply with 4″ PCD.
The mounting plate supplied has 6 holes, however the units are 4 hole mounting.
You will need to cut the excess plate off when mounting the units.
Supplied with Cast Steel Coupling Head.
If you wish to purchase a kit with a Pressed Head, then please use the link below to chose an alternative kit;
150kg Trailer Running Gear Kits – Kits with a pressed head are also supplied with plastic mudguards – where necessary.
Please Note – This kit does not include Mudguards.
If you wish to purchase a kit with Mudguards, then please use the above link to chose an alternative kit.
What is Included in 150kg Unbraked Trailer Running Gear Cast Head 10 Inch Wheels;
Description |
Part Number |
|
| 150kg Unbraked Units by Watson Jones | SU015 | |
| 2x Wheel Hubs with 4″ PCD | H20 | |
| 2x Trailer Wheels with 4″ PCD | WT500104(4*4)S | |
| 2x 6 Hole Suspension Mounting Plates | SP05 | |
| Secondary Coupling Cable | BC08 | |
| Pressed Steel Coupling Head | CH01 | |
| Nuts, Bolts and Fixings | ||
| 12x M8 x 30mm Set Screws | BT08030SS | |
| 12x M8 Nyloc Nuts | BTNN08 | |
| 24x M8 Washers | BTW08 | |
| 2x M12 x 80mm Bolts | BT12080BT | |
| 2x M12 Nyloc Nuts | BTNN12 | |
| 4x M12 Washers | BTW12 | |
If you require any guidance with building a trailer, then please follow the links below;
IVA Manual
Type Approval
Building a Trailer
