Basket
Premium Taper Roller Trailer Bearing 48548L 48510 Integral Seal
Part No. BRG48548L
This is a premium bearing for trailer brake drums such as; Indespension 250x40mm with small boss and 200x50mm with 83mm boss.
This sale is for 1 bearing only.
Comes complete with 48510 outer race.
The bearings require greasing before fitting.
These are premium taper roller bearings and are manufactured by NTN.
Premium Taper Roller Trailer Bearing 48548L 48510 Integral Seal Dimensions-
| Wheel Bearing Specifications – 48548L | ||
| Internal Diameter | Overall Diameter | Width |
| 34.93mm | 65.09mm | 18.03mm |
Fitting these bearings –
- Firstly, start by thoroughly greasing the inner bearing. Use your hand for best results.
- Next, slide the bearing onto the shaft making sure it is firmly pushed back. At this point be sure that the black seal is facing inwards.
- Then, grease the inside of the hub and the outer bearing.
- Re insert the outer bearing into the drum, tapered edge facing outwards
- Finally, slide the drum onto the shaft.
If you need wheel bearing grease, follow the link below;
Trailer Wheel Bearing Grease
For more information on replacing / fitting trailer wheel bearings, please follow the link below;
Trailer Wheel Bearing Replacement Guide
however, if you are unsure or require technical guidance, please call our team on 01909 473749.
To view all of our Premium Roller Trailer Bearings, please follow link below;
Premium Taper Roller Bearings
To view our range of Economy Taper Roller trailer bearings, please follow the link below;
Economy Taper Roller Bearings
