Peak 200x50mm Brake Drum – Trailer Wheel Hub Taper Roller Bearings
The Peak 200x50mm Brake Drum – Trailer Wheel Hub Taper Roller Bearings is a GENUINE PART.
Our Part No. BKDM20050PK65
Manufacturer’s Part No. BDM2050S4P
Peak trailer brake drum Knott 200mm x 50mm.
What is Included
- 1x Drum
- 1x 48548 Taper Roller Bearing
- x1 1.62″ x 2.62″ x 0.37″ Bearing Seal
- As well as 5x Wheel Studs and Nuts
The front bearing is a 44649, however this is not included within this sale.
If you wish to purchase the front bearing, then please;
Click Here
Internal diameter of drum – 200mm
Width of shoe face – 50mm
The PCD measurement of this drum is 6.5″.
If you require guidance with measuring your PCD, then please Click Here.
The rear 48548 bearings comes already pressed into the bearing with the rear seal already fitted.
Spare Parts for the Peak 200x50mm Hub;
The drum uses M16 x 45mm wheel studs.
If you require spare wheel studs for this drum, then please follow the links below;
M16 x 45mm Wheel Studs
For replacement wheel nuts, please
Click Here
Hub cap is a 50mm metal cap if you wish purchase this, then please
CLICK HERE
If you wish to view the front 48548 bearing, then please follow the link below;
48548 Trailer Wheel Bearing
We also have the Castellated Hub Nut available as a spare;
3/4″ UNF Castle Nut
WHEN TIGHTENING THE HUB NUT –
Tighten to 70nm, then rotate the wheel. Then, loosen off the nut then tighten to finger tight.
If you require any more information or require technical advise, then please call us on 01909 473749 and a member of our team will be more than happy to assist you.
If you require any guidance with building a trailer, then please follow the links below;
IVA Manual
Type Approval
Building a Trailer