Peak 203x40mm Trailer Brake Drum – 4 Stud x 5.5″ PCD
The Peak 203x40mm Trailer Brake Drum – 4 Stud x 5.5″ PCD is a GENUINE PART.
Our Part No. BKDM20340PEAK4x55
Manufacturer’s Part No. BDM2034S1P
Peak trailer brake drum for Knott 203x40mm brakes.
What is Included
- 203x40mm Drum
- 48548 Taper Roller Bearing x1 (already fitted in hub)
- 44649 Taper Roller Bearing x1
- 262162 Bearing Seal x1 (already fitted in hub)
- 50mm Metal Hub Cap x1
- Split Pin and Washer x1
- Castellated Hub Nut x1
Internal diameter of drum – 203mm
Width of shoe face – 40mm
The PCD measurement of this drum is 5.5″.
If you require guidance with measuring your PCD, then please Click Here.
Spare Parts for the Peak 203x40mm Hub;
The drum uses M12 x 1.5mm wheel studs and nuts.
If you require spare wheel studs for this drum, then please follow the links below;
M12 x 1.5mm Wheel Studs
For replacement wheel nuts, please use the links below;
M12 Conical Nuts
M12 Spherical Nuts
Hub cap is a 50mm metal cap if you wish purchase this, then please
CLICK HERE
If you wish to view the 48548 bearing, then please follow the link below;
48548 Trailer Wheel Bearing
To view the 44649 bearing with integral seal, then please follow the link below;
44649 Trailer Wheel Bearing
We also have the Castellated Hub Nut available as a spare;
3/4″ UNF Castle Nut
WHEN TIGHTENING THE HUB NUT –
Tighten to 70nm, then rotate the wheel. Then, loosen off the nut then tighten to finger tight.
If you require any more information or require technical advise, then please call us on 01909 473749 and a member of our team will be more than happy to assist you.
If you require any guidance with building a trailer, then please follow the links below;
IVA Manual
Type Approval
Building a Trailer